Continuous freezers

RFE PLC
Continuous Freezer.

Continuous freezer with Siemens PLC for full controllability.

Max capacity
800–1,500 ltr/hr
Max overrun
150 %
Power
28–36 kW
Control
Siemens PLC

Speak to us directly: +44 (0)1455 220179

ROKK’s RFE continuous freezer range comprises 11 machines, each varying in size and power, but all ideal for use in small laboratories up to large factories.

Equipped with self-contained Bitzer freon ‘refrigeration’ compressors, each machine in the RFE continuous freezer series has been designed for easy installation and increased mobility in the factory.

Download the specification sheet (PDF)

Pictures and dimensions on the website are given for indication purposes only. They may be subject to change at any time and form no part of any contract.

The machine

Three machines.
One freezing standard.

The range boasts uniquely designed high efficiency ‘Veloce’ barrels that are capable of cooling an entering ice cream mix to ultra-low temperatures in a matter of seconds.

As a result of this exceptionally quick ability to freeze, the machines ensure that ice molecules don’t have time to form, producing a hard, dry and luxurious end product each and every time.

The RFE continuous freezer range gives near total flexibility with output rates from as little as 100 litres of ice cream per hour up to 1,600 litres of ice cream per hour depending upon model, providing a sweet-spot in the range for any size of producer from small to very large.

Features

  • More consistent results
  • Reduced operator training
  • Lower dependency on skilled staff
  • Quality of ice cream not dependent on operator
  • Siemens PLC controls – considered the best
  • Increased reliability
  • Reduced wear
  • More measurable / repeatable results

Specification

The models.

Figures are based on a standard recipe and may vary. Maximum overrun is subject to mix suitability.

RFE PLC Continuous Freezer models compared
Model Max capacity (ltr/hr) Max overrun (%) Power (kW) Control (PLC)
RFE 800E PLC Siemens PLC 800 150 28 Siemens
RFE 1500E PLC Siemens PLC 1500 150 36 Siemens
RFE 800E PLC Siemens PLC
RFE 800E PLC Technical data
Maximum capacity 800 ltr/hr
Minimum capacity 250 ltr/hr
Maximum overrun 150%
Minimum overrun 20%
Air consumption 10 NLt/min
Weight 850 kg
Power requirement 28 kW
Water consumption 1500 ltr/hr
Refrigeration gas R449
Dimensions 1600 x 870 x 1720h mm

Enquire about this model: RFE 800E PLC

ROKK RFE PLC continuous freezer with touchscreen

Additional features

  • Overrun control
  • Twin piston mix and ice cream pumps
  • CIP
  • Automatic viscosity control
  • Industrial pumps and gearboxes
  • Ice cream temperature indicator
  • Bitzer compressor
  • Water cooled
  • Reduced power and water consumption
RFE 1500E PLC Siemens PLC
RFE 1500E PLC Technical data
Maximum capacity 1500 ltr/hr
Minimum capacity 350 ltr/hr
Maximum overrun 150%
Minimum overrun 25%
Air consumption 24 NLt/min
Weight 1200 kg
Power requirement 36 kW
Water consumption 3600 ltr/hr
Refrigeration gas R449
Dimensions 2130 x 870 x 1800h mm

Enquire about this model: RFE 1500E PLC

ROKK RFE PLC continuous freezer with touchscreen

Additional features

  • Overrun control
  • Twin piston mix and ice cream pumps
  • CIP
  • Automatic viscosity control
  • Industrial pumps and gearboxes
  • Ice cream temperature indicator
  • Bitzer compressor
  • Water cooled
  • Reduced power and water consumption

Primary benefits

Built for the shift, not the showroom.

Six reasons producers specify the RFE PLC Continuous Freezer over an electromechanical machine — all of them measured on a running line, not a spec sheet.

  1. Simple to operate

    This machine is fitted with Siemens PLC controls to provide complete yet simple control throughout the freezing process.

  2. Quick and efficient freezing

    Each machine is host to an industry unique, high-efficiency barrel to ensure a rapid freezing procedure that doesn’t allow for ice crystals to form within the product.

  3. Powerful pumps

    Powerful twin piston pumps in conjunction with rotary inlet and outlet pumps ensure a consistent flow and allow for seeds and fruit pulp to pass through easily without risk of causing blockages.

  4. Consistent aesthetic fill design

    The RFE series provides a steady and controlled output to ensure easy product management and consistent, aesthetically pleasing fill designs.

  5. Well engineered and highly reliable

    The range has been designed and manufactured around ROKK’s core principles of being ‘simple, solid and dependable’, resulting in only the very best, industry-recognised, components being used to ensure each machine is of the highest quality, versatile and extremely reliable.

  6. Chassis

    The over-sized chassis used to construct the RFE series are built entirely out of premium stainless steel and aluminium to maximise performance and reduce vibrations and sound pollution.

Downloads

Technical documents.

Enquire

Ask about the RFE PLC Continuous Freezer.

Choose the model you are interested in, or let our engineers recommend the right size for your production.

    Need spares for this machine?

    Parts Station stocks a host of spare parts for dairy and ice cream machinery.

    With international shipping and door-to-door courier services, Parts Station can supply them quickly before any major disruption occurs.

    Servicing for this machine

    All ROKK machines come with a one year warranty, backed-up by highly skilled, experienced and approachable service engineers, fully trained in both electrical, mechanical and refrigeration.

    “From supplying new equipment and delivering high-quality training, to carrying out annual servicing and providing prompt assistance during breakdowns, their commitment has always been outstanding.”

    Yarde Farm Ice Cream, UK

    Ready to specify your next freezer?

    Speak to a ROKK specialist about the right machine, configuration and support for your production line.

    Request a quote